The ADA Compliant, UL Certified, Pro Pool Series, Ranger™ 2 lift is very affordable and is the perfect choice for most in-ground pools or spas. The Ranger™ 2 can be found in hundreds of hotels and motels as well as backyard pools throughout the world. This is a unique, non-rotating lift that also provides a low profile and small footprint making it an incredibly solid, durable, and reliable product that blends in with almost any décor. Users access their pools sitting in the seat parallel to the lift and side of their pool in a single out-and-down motion. This seating position, and the smooth motion into the pool, gives the user a greater feeling of security.
- Safety: ADA compliant & UL certified
- Weight Capacity: 350 lbs.
- Stability: Stable, non-rotational design
- Material: Stainless steel construction with powder coat finish
- Quality: Made in USA
- California Prop 65 Warning
- Weight: 160 lbs.
- Dimensions: 43 x 33 x 57 in.
The easy to use and durable chest strap offers additional upper body support and security when using the pool lift. With a safety loop for right hand release, this Velcro chest strap is secure and easy to use when entering and exiting the pool lift seat. Chest straps can be added to any current Aqua Creek pool lift with just a few easy steps.
- F-423CS: Upper body chest strap
- 2-in wide polyester webbing
- Moisture and UV resistant polyester hook & loop fasteners
Add comfort and support by adding an Aqua Creek head rest to your lift. This easy to install option features a durable stainless steel frame with a thick closed-cell foam wrapped in a durable white vinyl cover. The head rest fits both our 18-inch and 22-inch wide chairs and are easily installed or removed if necessary.
Adjustable Height Seat
The adjustable height seat is standard on our Admiral Lifts but is made available as an option for the Ranger 2. The adjustable height seat allows the user to accommodate taller wheelchairs and can move the seat from 18-inches at deck level to 24-inches in 2-inch increments. NOTE: Raising the height of the chair at deck level has a direct 1 to 1 relation to how deep the lift can extend into the water. For example, if you raise the seat 2-inches at deck level, it now goes 2-inches LESS into the water.
- Stainless steel
- Powder coated finish to match your lift
- Adjusts 6-inches in height in 2-inch increments
- Max seat height is 24-inches
The fabric used for all of Aqua Creek’s covers is a heavyweight, polyester fabric. Polyester fabric is durable and breathable. It is soft, dries fast and has good elastic and high waterproof characteristics.
Our standard covers come with a PVC coating, are pigment dyed, and are available in Blue, Tan and Gray colors. Premium covers provide a more flexible Polyurethane coating and are solution dyed to help prevent fading. Our premium covers are only available in blue.
Note: Covers may or may not have a logo depending on supplier availability.
Pull-Out Leg Rest
Our pull out leg rest is often used to help our lifts clear spa walls or allow the lift’s seat to rest on a spa bench. The adjustability of the pull out leg rest allows you to support your legs as little or as much as you need to. By pulling the leg rest all the way out, it supports your entire leg or you can pull it out just far enough to support your upper legs; the choice is up to you. Now the leg rest option is available in colors to match your seat.
Solar Charging Station
Aqua Creek was the first and still the only pool lift manufacturer to offer solar charge capabilities for many of our lifts. These charging stations mount on your lift and provide a constant trickle-charge to the battery without the need to remove it. Once the battery reaches a full charge, the solar charge station shuts off until more charge is needed. This is a great product for use in outdoor environments that will save energy while maintaining and extending your battery life.
- Obtain clean energy from the sun!
- 36v /10 watt solar panel
- Auto shut off when battery is fully charged
- Extends the life of your battery with constant low voltage charge*
- One year warranty
- Made in USA
Save your back and prevent injuries when moving your pool lift to storage. Our Transport carts allow you to remove the pool lift from the pool when not needed easily and without risking injury. Simple design and operation allows the lift to easily be removed and stored on the cart out of the way. Having a transport cart also helps keep the lift from getting damaged.
- All steel cart with durable painted finish (color may vary)
- 8-in diameter wheels with rubber tread
- 1-in wide polyester strap to secure the lift to the cart
- Limited one (1) year warranty
Aqua Creek offers two types of 24V DC batteries that have been specifically designed for use with Aqua Creek lifts. Our Linak brand batteries are identifiable by the metal tabs on the bottom of the battery that connect to the control box on the lift and charger. The Vito brand battery has a cord coming out of the back of the battery that connects to a matching cord on the control box on the lift and the charger.
Extend the life of your battery by placing on the charger whenever you are not using your lift. You can also try our Solar Charging Station for a steady stream of low voltage power for your battery while it remains on the lift.
Additional InformationUser Warranty: Limited Five Years
About Aqua Creek